| Manufacturer | Vermeer |
| Model | HG4000E Horizontal Grinder |
| Category | Recycling, Renewable Energy, Rental, Wood Waste |
| Price | Request a Quote |
| Year | 2024 |
| Service Factor | 1.15 |
| Locked Rotor Amps | 3610 |
| Full Load Amps | 564 |
| Enclosure | TEFC |
| Rated Speed | 1790rpm |
| Phase | 3 |
| Frequency | 60 Hz |
| Voltage | 460 Volt |
| Frame | 586/7z |
| Manufacturer | Weg |
| Drive Belt Type | Belt |
| Added Items | Terminal Block, Thermostat (155C), Inverter Duty, Crusher Duty, Roller Bearings |
| Approximate Weight | 3912lbs (1774.5kg) |
| Power Factor | 0.86 |
| Nominal Efficiency | 95.8 (NEMA High) |
| Ambient Temperature | 40c (1352f) |
| Break Down | 200 |
| Locked Rotor (%) | 210 |
| Full Load Torque | 1447ft-lb (1961.9Nm) |
| Insulation Class | F |
| NEMA Design | B |
| Duty Cycle | S1 - Continuous |
| Drive Belt Type | Direct |
| Added Items | Terminal Block, C-Face |
| Approximate Weight | 864lbs (391.9kg) |
| Power Factor | .87 |
| Nominal Efficiency | 94.3 (IE3) |
| Ambient Temperature | 40c (1352f) |
| Break Down | 270 |
| Locked Rotor (%) | 250 |
| Full Load Torque | 177ft-lb (240Nm) |
| Insulation Class | F |
| NEMA Design | N |
| Duty Cycle | S1-Continuous |
| Service Factor | 1 |
| Locked Rotor Amps | 534 |
| Full Load Amps | 68.5 |
| Enclosure | TEFC |
| Rated Speed | 1475rpm |
| Phase | 3 |
| Frequency | 50 |
| Voltage | 380 |
| Horsepower | 50hp (37.3kw) |
| Frame | 225S/M |
| Manufacturer | Weg |
| Drive Belt Type | Direct |
| Added Items | Terminal Block, C-Face |
| Approximate Weight | 536lbs (243.1kg) |
| Power Factor | 0.83 |
| Nominal Efficiency | 94.5 (NEMA Premium) |
| Ambient Temperature | 40c (1352f) |
| Break Down | 270 |
| Locked Rotor (%) | 230 |
| Full Load Torque | 146ft-lb (197.9Nm) |
| Insulation Class | F |
| NEMA Design | B |
| Duty Cycle | S1 - Continuous |
| Service Factor | 1.25 |
| Locked Rotor Amps | 367 |
| Full Load Amps | 59.2 |
| Enclosure | TEFC |
| Rated Speed | 1775rpm |
| Phase | 3 |
| Frequency | 60 |
| Voltage | 460 |
| Horsepower | 50hp (37.3kw) |
| Frame | 326T |
| Manufacturer | Weg |
| Drive Belt Type | Direct |
| Added Items | Terminal Block, C-Face |
| Approximate Weight | 49lbs (22.2kg) |
| Power Factor | 0.83 |
| Nominal Efficiency | IE2 |
| Ambient Temperature | 40c (1352f) |
| Break Down | 250 |
| Locked Rotor (%) | 180 |
| Full Load Torque | 7.4ft-lb (10Nm) |
| Insulation Class | F |
| NEMA Design | N |
| Duty Cycle | S1 - Continuous |
| Service Factor | 1 |
| Locked Rotor Amps | 20.9 |
| Full Load Amps | 3.32 |
| Enclosure | TEFC |
| Rated Speed | 1430rpm |
| Phase | 3 |
| Frequency | 50 |
| Voltage | 380 |
| Horsepower | 2hp (1.5kw) |
| Frame | 90L |
| Manufacturer | Weg |
| Drive Belt Type | Direct |
| Added Items | Terminal Block, C-Face |
| Approximate Weight | 51lbs (23.1kg) |
| Power Factor | 0.84 |
| Nominal Efficiency | 86.5% (NEMA Premium) |
| Ambient Temperature | 40c (1352f) |
| Break Down | 300 |
| Locked Rotor (%) | 240 |
| Full Load Torque | 5.9ft-lb (8Nm) |
| Insulation Class | F |
| NEMA Design | B |
| Duty Cycle | S1 - Continuous |
| Service Factor | 1.25 |
| Locked Rotor Amps | 19.6 |
| Full Load Amps | 2.61 |
| Enclosure | TEFC |
| Rated Speed | 1750rpm |
| Phase | 3 Phases |
| Frequency | 60 Hz |
| Horsepower | 2hp (1.5kw) |
| Frame | 145T |
| Manufacturer | Weg |
| Special Paint | Yes |
| Extended Warranty | Yes |
| Special Tools Group | Yes |
| Screens | Yes |
| Preventative Maintenance | Yes |
| Wheels - Option Two | Aluminum |
| Tires - Option Two | 385/65R22.5 super singles |
| Wheels - Option One | Aluminum |
| Tires - Option One | 425/65R22.5 super singles |
| Capacity per Axle | 20000lbs (9071.8kg) |
| Manufacturer - Option One | Hendrickson |
| Suspension Type | Spring |
| Number of Axles | 2 |
| Frame Description | Unit body construction |
| Channel Setting | 50 channels |
| Battery Type | AA (qty 6) |
| Operating Range | Up to 300' (91.4 m) |
| Switches | Sealed membrane |
| Operational Faults | Yes |
| Machine Information | Yes |
| Engine Information | Yes |
| Display Type | LCD |
| Switches | Moisture-proof, toggle style |
| Gauges | Hydraulic pressure (implement circuit) |
| Machine Information | Yes |
| Engine Information | Yes |
| Display Type | LCD |
| Operational Faults | Yes |
| System Protection | Fused |
| System Voltage | 380V or 460V |
| Motor Series | Char-Lyn 6000 Series, Geroler |
| Pump Flow at Maximum RPM | 14.7gpm (55.6L/min) |
| Pump Type | Fixed displacement, gear pump |
| System Type | Open-loop |
| System Relief Pressure | 3000 |
| System Relief Pressure | 3000 |
| Pump Flow at Maximum RPM | 25.9 (60HZ) ; 24.9 (50HZ) |
| Pump Type | Variable displacement, axial piston |
| System Type | Open-loop, pressure- and flow-compensated |
| Filtration Method | Dual in-tank return filters (B5=200) |
| Recommended Oil | Vermeer HyPower 68 |
| Tank capacity | 60gal (227.1L) |
| Number of Coolers | 1 |
| Load Height | 14ft (4.3m) |
| Belt Speed | 529ft/min (161.2m/min) |
| Drive Motor | Fixed displacement, Geroler |
| Magnetic Drive Roller Diameter | 12.8in (32.5cm) |
| Standard Drive Roller Diameter | 12.8in (32.5cm) |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Idler Roller Diameter | 12in (30.5cm) |
| Return Roller Quantity | 3 |
| Belt Design | 3-ply - 330# with V-cleat |
| Width | 48in (121.9cm) |
| Length | 71.3ft (21.7m) |
| Splice | R2-stainless steel |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Liner Dimensions | 1/2" (1.3 cm) thick x 5" (12.7 cm) wide x 61.6" (156.5 cm) long |
| Millbox Lid Liner Dimensions | Abrasion-resistant steel |
| Number of Sides | 1 |
| Screen Area | 3131sq in (20200sq cm) |
| Screen Type | Fabricated out of abrasion-resistant steel |
| Screen Dimensions | 3/4" (1.9 cm) thick |
| Number of Screens | 2 |
| Center Retention Pin Dimensions | 2" (5 cm) dia. x 75.25" (191 cm) long |
| Number of Tips | 18 |
| Number of Hammers | 9 |
| Bearing - Inner Race Diameter | 4.3in (10.9cm) |
| Bearing Type | Double-row, spherical roller |
| Drum Speed | 845rpm |
| Drum Skin Thickness | 1.5in (3.8cm) |
| Tip Diameter | 31.3in (79.6cm) |
| Drum Diameter | 22.5in (57.2cm) |
| Millbox Opening | 60" (152 cm) wide x 26" (66 cm) high |
| Drum Cutting Width | 60.6in (153.9cm) |
| Center Retention Pin Dimensions | 2" (5 cm) dia. x 75.25" (191 cm) long |
| Number of Tips | 18 |
| Number of Hammers | 9 |
| Bearing - Inner Race Diameter | 4.3in (10.9cm) |
| Bearing Type | Double-row, spherical roller |
| Drum Speed | 1125rpm |
| Drum Skin Thickness | 1.5in (3.8cm) |
| Drum Cutting Width | 60.6in (153.9cm) |
| Drum Diameter | 22.5in (57.2cm) |
| Millbox Opening | 60" (152 cm) wide x 26" (66 cm) high |
| Tip Diameter | 31.3in (79.6cm) |
| Deflector Position | Variable |
| Thrown Object Deflector | Standard |
| Feed Roller Down Pressure | Adjustable |
| Drive Planetary | 34.2:1 |
| Drive Motor | Fixed displacement, Geroler |
| Number of Teeth | 10 bars |
| Tooth Design | Serrated bars |
| Material Type | Fabricated steel |
| Maximum Feed Height | 26in (66cm) |
| Infeed Roller Diameter | 28in (71.1cm) |
| Infeed Roller Weight | 1000lbs (453.6kg) |
| Infeed Roller Width | 58in (147.3cm) |
| Infeed Floor Construction | Welded steel with replaceable UHMW wear plates |
| Front Idler Roller Construction | Self-cleaning steel auger |
| Drive Roller Construction | Welded steel |
| Drive Type | Radial piston motor |
| Material Construction | steel |
| Feed Conveyor Type | Welded slat chain |
| Flare Construction | Integrated with frame |
| Loading Height | 6.5ft (2m) |
| Feed Table Capacity | 4.8cu yd (3.7cu m) |
| Feed Table Length - Option One | 15ft (4.6m) |
| Feed Table Depth | 21in (53.3cm) |
| Feed Table Width | 60in (152.4cm) |
| Weight | 3020lbs (1369.8kg) |
| Depth | 26in (66cm) |
| Width | 119in (302.3cm) |
| Height | 90in (228.6cm) |
| Sound Power | 110.2 db(A) re1pW |
| Front Pad Weight | 13900lbs (6304.9kg) |
| Rear Pad Weight | 25000lbs (11339.8kg) |
| Weight | 38900lbs (17644.7kg) |
| Maximum Height - Folding Conveyor | 143ft (43.6m) |
| Maximum Length - Folding Conveyor | 47.1ft (14.4m) |
| Maximum Width | 100in (254cm) |
| Weight | 38900lbs (17644.7kg) |
| Maximum Height Transport with Dolly | 11.9in (30.2cm) |
| Maximum Width Transport - with Dolly | 8.4ft (2.6m) |
| Maximum Length (Operation) | 47.1ft (14.4m) |
| Maximum Length - Transport | 31.1ft (9.5m) |
| Drive Belt Type | Belt |
| Added Items | Terminal Block, Thermostat (155C), Inverter Duty, Roller Bearings |
| Approximate Weight | 4346lbs (1971.3kg) |
| Power Factor | .87 |
| Nominal Efficiency | 95.7 (IE2) |
| Ambient Temperature | 40c (1352f) |
| Break Down | 220 |
| Locked Rotor (%) | 210 |
| Full Load Torque | 1750ft-lb (2372.7Nm) |
| Insulation Class | F |
| NEMA Design | N |
| Duty Cycle | S1-Continuous |
| Service Factor | 1 |
| Locked Rotor Amps | 4730 |
| Full Load Amps | 675 |
| Enclosure | TEFC |
| Rated Speed | 1490rpm |
| Phase | 3 |
| Frequency | 50 |
| Voltage | 380 |
| Horsepower | 500hp (372.8kw) |
| Frame | 355 M/L |
| Manufacturer | Weg |
