BC1200XL Gas Brush Chipper
- Get more done with the aggressive feeding action
- Intelligent feeding for the toughest jobs
- Safety features designed with the operator in mind
General
| Manufacturer | Vermeer |
| Model | BC1200XL Gas Brush Chipper |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
General Dimensions and Weights
| Length - Feed Table Up, Tongue In | 168in (426.7cm) |
| Length - Table Down, Tongue Extended | 206in (523.2cm) |
| Width | 79in (200.7cm) |
| Height | 103in (261.6cm) |
| Weight - Engine Option One | 5680lbs (2576.4kg) |
| Tongue Weight - Engine Option One | 660lbs (299.4kg) |
| Sound Power | 124 dB(a) |
Engine - Option one
| Make and Model | Origin 4.3 |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 115hp (85.8kw) |
| Torque (Max) | 231ft-lb (313.2Nm) |
| Max Fuel Consumption | 8.3gph (31.4lph) |
| Fuel Type | Gasoline |
| Air Cleaner | 2-stage dry with safety valve |
| Oil Filter | Spin-on |
| Recommended Oil | SAE 10W30 |
| Oil Volume with Filter | 4.5qt (4.3L) |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 4gal (15.1L) |
| Alternator | 70 Amp |
| Fan | 19" sucker |
Feed System
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 2 |
| Feed Roller Clamp Load | 2650lbs (1202kg) |
| Feed Roller Clamp Type | Hydraulic cylinder |
| Feed Roller Minimum Distance to Drum | 1in (2.5cm) |
| Feed Roller Dimension | 15 |
| Number of Knives | 8 |
| Weight of Feed Roller | 150lbs (68kg) |
| Feed Roller Dimension (Two) | 11.1" (28.3 cm) |
| Number of Knives (2) | 12 |
| Weight of Feed Roller (Option Two) | 80lbs (36.3kg) |
| Number of Feed Roller Motors | 2 |
| Motor Manufacturer | White Hydraulic |
| Feed Speed | 110ft/min |
| Infeed Table Width | 52in (132.1cm) |
| Infeed Table Length | 30.1in (76.5cm) |
| Infeed Hopper Height | 32in (81.3cm) |
| Infeed Throat Capacity | 13.3" x 17" (33.7 cm x 43.2 cm) |
| Pinch Point - Distance to End of Feed Table | 67.4in (171.2cm) |
| Distance from Feed Table to Ground | 27.2in (69.1cm) |
| Infeed Table Material Thickness | .2in (.5cm) |
Safety System
| Bottom Feed Stop Bar | Standard |
| Bottom Feed Stop Bar Diameter | 2in (5.1cm) |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Actuation Force (BFSB) | 34lbs (15.4kg) |
| Normal Sensitivity | 22deg |
| Reduced Sensitivity | 12deg |
| Reset Method | Dual green hold-to-run buttons |
| Four Position Feed Control Bar | Standard |
| Diameter | 2in (5.1cm) |
| Material Thickness | .1in (.3cm) |
| Positions | Four positions: Emergency stop, forward, and reverse |
| Actuation Force | 34lbs (15.4kg) |
| Green Hold to Run Button | Standard |
Drum/Disc Cutting System
| Material Capacity | 13.3in (33.8cm) |
| Width | 20in (50.8cm) |
| Thickness | .4in (1cm) |
| Diameter | 20in (50.8cm) |
| Speed | 2000 rpm |
| Weight With Shaft | 480lbs (217.7kg) |
| Safety Lock - Number of Positions | 2 |
| Number of Knives | 2 |
| Knife Thickness | .6in (1.6cm) |
| Material | A8 chipper steel |
| Useable Edges | 2 |
| Knife Size | .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) |
| Number of Bolts/Knife | 4 |
| Replaceable Threaded Knife Block | Yes |
| Number of Paddles | 5 |
| Fixture Method | Weld-on |
| Air Flow | 2000cfm |
| Bedknife Size | 3.5" x 17.3" (8.9 cm x 43.8 cm) |
| Bedknife Thickness | 1in (2.5cm) |
| Bedknife Material | 1018 |
| Bedknife - Number of Useable Edges | 4 |
Cutter Drive Components - Engine Option One
| Number of Bearings | 2 |
| Bore | 2.4in (6.2cm) |
| Type | Spherical roller |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400lbs (14242.8kg) |
| Static Capacity | 53500lbs (24267.2kg) |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5V |
Cutter Drive Components - Engine Option Two
| Number of Bearings | 2 |
| Bore | 2.4in (6.2cm) |
| Type | Spherical roller |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400lbs (14242.8kg) |
| Static Capacity | 53500lbs (24267.2kg) |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5V |
Discharge System
| Chute Height | 104in (264.2cm) |
| Bottom Thickness | .1in (.2cm) |
| Top Thickness | .1in (.3cm) |
| Side Wall Thickness | .1in (.3cm) |
| Deflector Thickness | .1in (.3cm) |
| Chute Rotation Angle | 270deg |
| Rotation Type | Manual pivot with handle |
| Rotational Lock | Yes |
Hydraulic System
| Tank capacity | 12gal (45.4L) |
| Recommended Oil Type | Vermeer VMF |
| System Type | Open center, dual pumps |
| Filtration Method | 10 micron return, 100 micron suction |
| Pump Flow at Maximum RPM | 4.5gpm (17L/min) |
| System relief pressure | 2500psi (172.4bar) |
| Auto Reverse PSI | 2500psi (172.4bar) |
| Flow Control | No |
| Directional Control | Yes |
| Oil Cooler | No |
Electrical System
| System Voltage | 12 volt |
| Battery | Group 31; 950 CCA |
| Standard Gauges | Fuel, hour gauges, voltage, water temperature, oil pressure, tachometer gauges, multifunction display |
| Switches | Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle |
| Controller | Vermeer ACS |
| Display | LCD |
| Shutdown System | High temperature, low pressure |
| Radio Remote Control | No |
Chassis
| Frame Description | 7" (17.78) Z channel; 0.25" (0.64 cm) thickness |
| Toolbox Description | No |
| Tongue Description | 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) |
| Tongue Extension | Extendable 18" (45.7 cm) |
| Hitch Type | Pintle |
| Fender Description | Bolt-on |
| Axle/Suspension | Torsion |
| Type - Option One | Rubber torsional |
| Manufacturer - Option One | Dexter axle |
| Capacity - Option One | 7000 lb (3175.2 kg) |
| Tires - Option One | ST235/80/R16 Load Range E |
| Wheels - Option One | 16" (40.6 cm) |
| Tires - Option Two | ST285/75/R16 Load Range E |
| Wheels - Option Two | 16" (40.6) |
| Brake Type | Electric |
| Trailer Light Type | LED |
Winch Option
| Winch Relief System | 2200psi (151.7bar) |
| Winch Boom Structure | .25" (6.4 mm) Grade 50 |
| Winch Input Speed | 51rpm |
| Winch Controls | Forward, reverse and free spool |
| Winch Rope | 7/16' (1.11 cm) |
| Rope Length | 150ft (45.7m) |
| Rope Line Pull | 2000lbs (907.2kg) |
| Rope Choker | Detachable chain choker |
Other Options
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |